Configuring Rip - HP 7102dl - ProCurve Secure Router Configuration Manual

Procurve secure router 7000dl series - advanced management and configuration guide

Hide thumbs Also See for 7102dl - ProCurve Secure Router:

Table of Contents

Using the Web Browser Interface for Advanced Configuration Tasks

You can use one or more routing protocols in conjunction with each other and

with static routing. For example, OSPF is an internal gateway protocol (IGP).

You can use OSPF in your private network and BGP to advertise routes to your

Internet service provider (ISP).

This section explains how to configure dynamic routing.

Configuring RIP

Select Routing under Router/Bridge in the navigation bar.

Move to the Dynamic Routing Protocols window and click the Configure

button next to RIP.

Figure 16-113. Configuring RIP

In the RIP Configuration window, select Version 1 or Version 2 from the

RIP Version pull-down menu.

Show Quick Links

Table of Contents