Applying Access Control to Router Interfaces
Troubleshooting
Debug ACLs
You can debug events associated with a particular ACL. From the enable mode
context, enter:
Syntax: debug access-list <listname>
Replace <listname> with the name of the ACL you want to debug.
For example, if you want to debug the Inside ACL, enter:
ProCurve# debug access-list Inside
To end the debug, enter one of the following commands:
Syntax: no debug access-list <listname>
Syntax: undebug all
The undebug all command ends all debug sessions on the ProCurve Secure
Router.
N o t e
Debug commands are processor intensive and could compromise perfor-
mance.
5-59