HP 7102dl - ProCurve Secure Router Configuration Manual page 716

Link Layer Discovery Protocol
Viewing LLDP Information
14-6
capabilities—all the functions the neighbor can fulfill, which include:
• router
• bridge
• host
• DOCSIS device (a type of cable modem)
• WLAN Access Point
• repeater
• telephone
enabled capabilities—the neighbor's current function; the display gives a
key for the capabilities (for example, R for router)
local port or interface—the interface through which the router connects
to the neighbor
management address—an IP address at which the management agent for
the neighbor can be reached
Use the detail option to see the complete LLDP information for all neighbors.
(See Figure 14-3.) For example, enter:
ProCurve# show lldp neighbors detail
If you want to limit the display to the neighbor (or, for a multi-access network,
neighbors) of a specific interface, use the interface <interface ID> option.
For example, enter:
ProCurve# show lldp neighbors interface eth 0/1 detail
ProCurve# show lldp neighbors detail
Chassis ID: 00:12:79:05:25:D4 (MAC Address)
System Name: SiteA
Device Port: ppp 1 (Locally Assigned)
TTL: 120
Platform: ProCurve Secure Router 7203dl
Software: Version: 03.01, Date: Fri Aug 12 08:41:09 2005
Capabilities: Bridge, Router
Enabled Capabilities: Router
Local Port: ppp 1
Management Addresses:
Address Type: IP version 4, Address: 10.1.1.1
Interface Type: Interface Index, Interface Id: 15
Figure 14-3. Viewing Detailed Information about LLDP Neighbors
Neighbor's hostname
Neighboring device type
Address from which you
can configure the
neighbor