HP 7102dl - ProCurve Secure Router Configuration Manual page 1029

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-89. Configuring Advanced IKE Options
4. You can modify security parameters in the Add/Modify/Delete IKE
Attributes for Priority ID <policynumber> window. These parameters
include:
• encryption/hash algorithm
• authentication method
• Diffie-Hellman key group
• IKE SA lifetime
Select the desired setting from the pull-down menu for each parameter.
Enter the IKE SA lifetime in the Lifetime field in seconds. The local
settings must match the peer's settings. Table 16-5 displays settings that
you can configure for the IKE policy.
Setting Up Virtual Private Networks
16-115