Firmware - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
1. In the Delete Config File section, select the file that you want to delete
from the Delete Config pull-down menu. This menu will display all the
files on flash and cflash that do not have a .biz extension.
2. Click the Delete button to erase the file.
Figure 16-7. Delete Config File
For information about advanced file management functions such as renaming,
uploading, or downloading files, see Chapter 1: Overview.

Firmware

The Configuration section allows you to set the file to boot your router with
the desired configuration. The Firmware section allows you to set your
router's SROS files. These files are the base files that the router uses for its
operating system. Be careful when setting and managing router firmware;
setting the wrong file may prevent your router from booting with the proper
configuration or even from booting at all.
Set Primary/Backup Firmware. Firmware files all have the .biz extension.
The SROS software file is always named SROS.BIZ.
1. Select the file you want for your primary firmware from the Primary
Firmware pull-down menu. Generally, this file should be cflash
SROS.BIZ.
2. To set the backup firmware, select the SROS software from the Backup
Firmware pull-down menu. Typically, this file should be SROS.BIZ, the
SROS software on the router's internal flash.
16-11