Using the Web Browser Interface for Advanced Configuration Tasks
Configuring the ProCurve Secure Router OS Firewall
16-30
Figure 16-21. Configuring General Firewall Settings
After you enable the firewall, the ProCurve Secure Router automatically
guards against all attacks shown in Table 16-1 on page 16-28, as well as against
SYN-floods. You can only enable checks for WinNuke attacks from the CLI.
You can also disable SYN-flood protection from the CLI.
Enabling Event Logging
Use the settings on the Settings tab to enable event history, set the priority
level for events, and specify whether or not you want the event history
messages to be displayed on the CLI.
1.
Click Logging in the Utilities section of the navigation bar, and then select
the Settings tab.