Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-114. Selecting the RIP Version
4.
Click Apply.
5.
Specify the networks that should participate in RIP in the Add a Network
to be Advertised by RIP window. Enter the network address in the IP
Network fields and the subnet mask in the Subnet Mask fields. (Note that
you enter a subnet mask rather than wildcard bits.)
The router will advertise routes to the specified networks. Only interfaces
that have an IP address on these networks participate in RIP, so remember
to advertise the networks on WAN interfaces as well as LAN interfaces.
6.
Click Add.
7.
Advertised networks display at the bottom of the window (for example,
network 192.168.1.0 /24 in Figure 16-115).
Routing
16-147