HP 7102dl - ProCurve Secure Router Configuration Manual page 1047

Using the Web Browser Interface for Advanced Configuration Tasks
11. Fill in information for a self certificate request in the Step 3 of 4: Request
a Personal Certificate using Automatic Entry window:
Figure 16-104. Specifying SCEP Parameters
a. Complete the Set SCEP Parameters section to allow the router to
submit the request and obtain the self certificate automatically:
i. The URL field should display the CA server's fully-qualified
domain name.
ii. You can enter a SCEP password. Your CA will request this pass-
word if you ask it to delete the certificate. Enter the password in
the SCEP Challenge Password field. Enter the same password in
the Re-enter field to ensure that you did not miskey it.
iii. You can alter the number of times the Secure Router OS will
attempt to obtain the self certificate by changing the value in the
Number of Retries field. You can also alter the time between
retries.
b. Set parameters for the digital signature in the Select Encryption
Strength section. Select either RSA or DSS from the Encryption
Algorithm pull-down menu. (You must choose the standard that you
chose for the IKE authentication method when configuring the VPN
connection.)
Setting Up Virtual Private Networks
16-133