Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-33. Add New Custom Policy Entry
7.
On the Add New Custom Policy Entry screen, in the Filter Type field,
select either:
•
Permit to define traffic that will initiate the dial-up connection
•
Deny to define traffic that will be ignored
8.
In the Protocol field, use the pull-down menu to select traffic based on a
particular protocol. Use the ICMP Message Type (ICMP Only) option to
define ICMP traffic.
9.
In the Source Data section, define the source IP address and port.
Configuring Access Control from the Web Browser Interface
16-43