HP 7102dl - ProCurve Secure Router Configuration Manual page 969

Using the Web Browser Interface for Advanced Configuration Tasks
3. Enable Stateless Processing, if applicable.
4. For Destination Security Zone, select <Any Security Zone>, a particular
security zone, or <Self-bound>. This setting determines the destination
address of the traffic you want to select. The <Self-bound> option desig-
nates the destination as the internal IP stack—the router itself.
5. If you select NAT as the Policy Action, the NAT options are enabled.
• Select Source with Overloading to configure many-to-one NAT.
• Select Destination to configure one-to-one NAT. You can then config-
ure port translation.
6. Click Apply.
7. In the Add/Modify/Delete Policy Traffic Selectors section, click Add New
Traffic Selector. The Add New Custom Policy Entry window is displayed.
Configuring Access Control from the Web Browser Interface
16-55