HP 7102dl - ProCurve Secure Router Configuration Manual page 996

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Network Monitoring
16-82
Figure 16-65. Set Actions
17. Select the action to take when the probe reports failure. For the Override
Static Route option, specify either NextHop IP (and specify the next hop
address for the route) or NextHop Interface (and specify the forwarding
interface for the route). If the forwarding interface is an Ethernet inter-
face, you should select the NextHop IP option.
The Network Monitor Configuration Wizard creates a monitored default
route through the interface or next-hop IP address specified.
18. Click the Next button. The Confirm window displays.