HP 7102dl - ProCurve Secure Router Configuration Manual page 1035

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-93. Configuring the Remote ID List
1. Select VPN Peers under VPN in the left navigation bar.
2. Move to the Advanced VPN Policies window and click the Advanced VPN
Policies button.
3. Move to the Add/Modify VPN Remote IDs window. Click Add New Remote
ID.
4. Depending on how you want to identify the peer, select one of the
following from the Remote ID Type pull-down menu:
• IP Address
• IP Subnet
• Domain Name
• Distinguished Name
• Email Address
• Match Any Remote ID
Remember that you can only use distinguished names when using a digital
signature standard for IKE authentication. You should enter an IP address
when using IKE main mode.
Setting Up Virtual Private Networks
16-121