HP 7102dl - ProCurve Secure Router Configuration Manual page 929

Using the Web Browser Interface for Advanced Configuration Tasks
Managing AutoSynch™, Files, Firmware, Logging, and Boot Software
1. Click Debug in the Utilities section of the navigation bar.
2. To add a debug filter, click the Add Debug Filter button.
Figure 16-11. Add Debug Filter
3. From the Category pull-down menu, select the desired debug filter.
Figure 16-12. Add Debug Filter Category
a. If the debug filter that you select has subcategories, from the Subcat-
egory pull-down menu that appears, select the subcategory that you
want.
Figure 16-13. Add Debug Filter Subcategory
b. Or, if the debug filter that you select requires other information, enter
the information in the field provided.
16-15