HP 7102dl - ProCurve Secure Router Configuration Manual page 891

N o t e
Table 15-25. Viewing BGP Debug Messages
Message
updates:
• new route
• withdrawn routes
events, such as a change in the neighbor's
status
all BGP messages except keepalives:
• all (do not enter an option keyword)
• received (in)
• transmitted (out)
keepalives
Remember that the debug commands can be draining on the processor.
Table 15-26. Viewing BGP Information
View
• BGP table, which for each route includes:
– origin
– destination
– next hop
– AS in path
– whether selected as best
• Local router ID and AS
• BGP table with only the routes advertised
to a specific neighbor
• BGP table with only the routes received
from a specific neighbor
• BGP table with only the routes actually
added to the routing table
Specific route:
– advertising router IP address
– advertising router ID
– neighbors to which the route is
advertised
IP Routing—Configuring RIP, OSPF, BGP, and PBR
Command Syntax
debug ip bgp updates
debug ip bgp events
debug ip bgp [in | out]
debug ip bgp keepalives
Command Syntax
show ip bgp
show ip bgp neighbors <A.B.C.D>
advertised-routes
show ip bgp neighbors <A.B.C.D> received-
routes
show ip bgp neighbors <A.B.C.D> routes
show ip bgp <A.B.C.D> <subnet mask>
Troubleshooting Routing
15-165