Configuring An Internal Router - HP 7102dl - ProCurve Secure Router Configuration Manual

IP Routing—Configuring RIP, OSPF, BGP, and PBR
Quick Start
15-180
192.168.254.2
10.2.1.0 /24
Internal
.2
Router
.2
Network 2
10.2.2.0 /24
Stub area 1
Figure 15-44.Sample OSPF Network

Configuring an Internal Router

1. If one does not already exist, create a loopback interface.
Syntax: interface loopback <interface number>
2. Assign the loopback interface an IP address.
Syntax: ip address <router ID> <subnet mask>
This address will be the local router ID. For example:
ProCurve(config-loopback 1)# ip address 192.168.254.2 /28
Syntax: ip address <router ID> <subnet mask>
3. Move to the global configuration mode context and access the OSPF
configuration mode context:
ProCurve(config)# router ospf
192.168.255.1
ABR
.1
.1
10.3.1.0 /24
.2
Internal
Total stub
Router
area 2
192.168.253.3 .2
Network 4
10.3.2.0 /24
Area 0
.1
Network 1
10.1.2.0 /24
.2
ASBR
.1
192.168.252.4
External
Network