Viewing Access Policy Statistics - HP 7102dl - ProCurve Secure Router Configuration Manual

Configuring Network Address Translation
Viewing ACLs and ACPs
ProCurve# show ip policy-sessions
Src IP Address
----------------
Policy class "Inside":
tcp (80)
192.168.20.1
Policy class "Outside":
tcp (20)
192.168.100.99
Policy class "self":
icmp (50)
0.0.0.0
6-20
Src Port Dest IP Address
--------- --------------
2001 172.16.1.1
1908 172.16.3.10
10 192.168.100.1
Figure 6-7. Displaying IP Policy Sessions
If you want to view information about the sessions associated with a specific
ACP, enter:
ProCurve# show ip policy-sessions <policyname>
Replace <policyname> with the name of the specific ACL.

Viewing Access Policy Statistics

You can also display a summary of ACP statistics by entering the following
command from the enable mode context:
ProCurve# show ip policy-stats
The Secure Router OS displays the total number of current sessions. (See
Figure 6-8.) It also lists all ACPs assigned to interfaces and the entries of each
ACP. It displays:
the number of sessions established using each ACP (policy class)
the number of maximum sessions allowed for that ACP
the number of hits for each entry in the ACP
the number of bytes for traffic associated with a particular ACP entry
Dst Port NAT IP Address
-------- ---------------
80 d 10.10.3.10
80 d 10.10.3.10
10
NAT Port
-------
80
80