HP 7102dl - ProCurve Secure Router Configuration Manual page 1021

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-82. Adding Local VPN Networks
If you based the policy on a previous policy, the window already includes
the local network(s) for that policy. If necessary, delete it.
11. Enter the IP address and subnet mask for the remote network in the
Step 4 of 4: Destination Networks Allowed to Connect Using "<VPN
mapname>" window.
If you have based the policy on a previous policy, you can click the already
configured network. The wizard will populate the fields above with the
correct values. You can then edit the address as necessary. Click Add.
For example, you click the entry for remote IP subnet 192.168.2.0
255.255.255.0 displayed at the bottom of the window in Figure 16-83. The
Web browser interface fills in the fields above as shown in Figure 16-83.
Setting Up Virtual Private Networks
16-107