HP 7102dl - ProCurve Secure Router Configuration Manual page 994

Using the Web Browser Interface for Advanced Configuration Tasks
Setting Up Network Monitoring
16-80
Figure 16-63. HTTP Probe Details
13. Use the Request Type pull-down menu to select the type for the probe—
HTTP Get, HTTP Head, or HTTP Raw. An HTTP Get probe sends a
standard HTTP request for a Web page. An HTTP Head probe sends a
similar request, but asks the Web server to return only the packet header
rather than the entire Web page.
If you select the HTTP Raw type, you must configure the request. A text
box appears in which you can type the series of HTTP commands that the
ProCurve Secure Router places in the data portion of the probe packet.
See Chapter 9: Network Monitoring for more information on raw strings.
14. Click the Next button. The Failure Parameters window displays.