Setting Lldp Timers; Configuring Lldp - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks

Configuring LLDP

Devices in a Data Link Layer network exchange Link Layer Discovery Protocol
(LLDP) messages. These messages contain information about the transmitting
device.
In the Web browser interface, you can easily:
set LLDP timers
enable and disable LLDP on an interface
view LLDP neighbors
However, you cannot prevent an interface from transmitting only certain
LLDP messages. You must perform this task in the CLI.
A useful feature of the Web browser interface is that you can immediately
access LLDP neighbors through a Web or Telnet session.

Setting LLDP Timers

LLDP can be a chatty protocol. You can increase LLDP intervals to minimize
overhead.
An LLDP header includes a TTL field that tells neighboring devices how long
to store the information in the message. You can also alter this TTL.
To set LLDP timers:
1. In the navigation bar, select LLDP under System.
Figure 16-109. Configuring LLDP Parameters
Configuring LLDP
16-141