Clear Acl Counters - HP 7102dl - ProCurve Secure Router Configuration Manual

Applying Access Control to Router Interfaces
Troubleshooting
Src IP Address
----------------
Policy class "Inside":
tcp (80)
192.168.20.1
Policy class "Outside":
tcp (20)
192.168.100.99
Policy class "self":
icmp (50)
0.0.0.0
Policy class "Private":
5-58
Src Port Dest IP Address
--------- --------------
2001 172.16.1.1
1908 172.16.3.10
10 192.168.100.1
Figure 5-20. Using the Information from the show ip policy-sessions Command to
Clear a Specific Session

Clear ACL Counters

When troubleshooting problems with the ACLs that are configured on a router,
clear the counters for matches to ACL entries so that you can isolate the
problem. From the enable mode context, enter:
Syntax: clear access-list [<listname>]
If you want to clear all counters, enter:
ProCurve# clear access-list
If you want to clear counters for a particular ACL, use the <listname> option:
ProCurve# clear access-list <listname>
For example, if you want to clear the counters for the Inside ACL, enter:
ProCurve# clear access-list Inside
Dst Port NAT IP Address
-------- ---------------
80 d 10.10.3.10
80 d 10.10.3.10
10
NAT Port
-------
80
80
Highlight and copy
the entire line into
your command