Viewing Backup Configurations and Troubleshooting Backup Connections
To verify this information, you can use the show commands in Table 3-17.
Table 3-17. Backup show Commands
View
backup dial list
days and times backup is enabled
backup PPP interface IP address • • show interfaces ppp <backup interface number>
backup PPP interface
authentication information
Viewing Backup Settings
To view the backup settings that are specific to each connection, enter this
command:
ProCurve# show backup interfaces
The CLI will display a report on every logical interface for which backup is
enabled. (See Figure 3-29.)
Configuring Backup WAN Connections
Command Syntax
show backup interfaces
show backup interfaces
• show running-config interface ppp
<backup interface number>
show running-config interface ppp
<backup interface number>
3-87