Enabling Ip Services On The Router - HP 7102dl - ProCurve Secure Router Configuration Manual

Using the Web Browser Interface for Advanced Configuration Tasks

Enabling IP Services on the Router

16-20
Enabling IP Services on the Router
In the IP Services section, you can enable or disable the following servers on
the router:
FTP
TFTP
HTTP
HTTPS
secure copy
Telnet
SSH
You can also configure settings for the Web browser interface.
In addition to enabling these servers, you must configure passwords for them
so that users can access the router. To configure passwords for management
access, see "Configuring Passwords to Control Management Access to the
Router" on page 14-26 of the Basic Management and Configuration Guide.
1. Click System > IP Services in the left navigation bar. The IP Services
Enable/Disable window is displayed.