Viewing Backup Configurations and Troubleshooting Backup Connections
Viewing Information about Demand Routing and
Troubleshooting Problems
You can use show commands to view different aspects of your demand routing
configuration. For example, you can view the status of a demand interface and
any dial-up connections that are established through a demand interface.
Table 3-14 lists the show commands for demand routing.
Table 3-14. show Commands for Demand Routing
Command
show interfaces demand
<number>
show demand interface demand
<number>
show demand sessions
show demand resource pool
<pool name>
show running-config
show running-config interface
demand <number>
Viewing the Status of the Demand Interface
To view the status of the demand interface, enter the following command from
the enable mode context:
Syntax: show interfaces demand <number>
For example, to view the status of demand interface 1, enter:
ProCurve# show interfaces demand 1
Configuring Backup WAN Connections
Description
displays the status of the demand interface
displays a summary of information about the demand
interface, including the timers, state, physical interface
in use (if connection is up), last outgoing call, and last
incoming call
displays information about existing dial-up connections
established through demand routing
lists the resources assigned to the resource pool and the
demand interface associated with the resource pool
displays the current configuration
displays the current configuration for a demand interface
3-77