Viewing Acls And Acps; Displaying Acls - HP 7102dl - ProCurve Secure Router Configuration Manual

Viewing ACLs and ACPs

Table 5-11 lists the show commands that you can use to view and troubleshoot
ACLs and ACPs.
Table 5-11. show Commands for ACLs and ACPs
Command
show access-lists
show ip access-lists
show ip policy-class
show ip policy-sessions
show ip policy-sessions
<policyname>
show ip policy-stats

Displaying ACLs

To view all of the ACLs that are configured on the ProCurve Secure Router,
move to the enable mode context and enter:
Syntax: show access-lists
If you are in a different context (other than the basic mode context), you can
use the do command:
Syntax: do show access-lists
Applying Access Control to Router Interfaces
Explanation
displays all of the ACLs configured on the ProCurve Secure
Router
displays all of the IP ACLs configured on the ProCurve
Secure Router
displays all of the ACPs configured on the ProCurve Secure
Router
displays the total number of sessions associated with
ACPs, the number of sessions per ACP, and detailed
information about each device that has established a
session
displays the number of sessions associated with the
specified ACP and information about each device that has
established a session
displays statistics about the policies, such as the number
of sessions and the number of sessions allowed
Viewing ACLs and ACPs
5-51