HP 7102dl - ProCurve Secure Router Configuration Manual page 230

ProCurve Secure Router OS Firewall—Protecting the Internal, Trusted Network
Configuring Logging
4-30
To configure the router to forward event logs to an email address or addresses,
you must:
1. Enable log forwarding to an email address. Enter:
ProCurve(config)# logging email on
2. Specify the IP address of the email server. You can use either the IP
address of the email server or the hostname:
Syntax: logging email receiver-ip [<A.B.C.D> | <hostname>]
For example:
ProCurve(config)# logging email receiver-ip 172.16.60.99
3. Specify the email address for the recipient(s) of the logs:
Syntax: logging email address-list <email address>;<another email address>
More than one person can receive the logs from the ProCurve Secure
Router. To specify multiple email addresses, separate each email address
with a semi-colon. Do not enter a space between the next email address
and the semi-colon that precedes it. You can specify as many email
addresses as you want. For example:
ProCurve(config)# logging email address-list
juan@procurve.com;heidi@procurve.com
4. If you want the router to forward exception reports as well, enter this
command:
Syntax: logging email exception-report address-list <email address>;<another
email address>
Enter the email addresses of the people who should receive the exception
reports in the same way that you entered addresses for emailed logs.
5. Specify the priority level for events that the router forwards to the email
addresses:
Syntax: logging email priority-level [info | notice | warning | error | fatal]
For example:
ProCurve(config)# log forwarding priority-level error
The priority level can be the same as or different than that for events
logged to the router's event history. The default level is warning.