HP 7102dl - ProCurve Secure Router Configuration Manual page 980

Using the Web Browser Interface for Advanced Configuration Tasks
Configuring Quality of Service
C a u t i o n
16-66
Figure 16-51. Sample QoS Configuration for VoIP Traffic
9. Review your settings in the Confirm window:
a. Use the Back button to reconfigure any incorrect settings. You can
also click the name of a window in the left navigation bar. For
example, you can select RTP Traffic to change how the router selects
traffic for the queue.
b. If the settings are correct, click Finish.
Remember that these settings will overwrite any QoS policies already applied
to the specified WAN interface. If you want to establish CBWFQ, another low
latency queue, or packet marking on the interface, you must afterwards add
entries to the map created by the QoS wizard. You can learn the name of this
map by returning to the QoS Maps window and viewing the Modify/Delete a
QoS Map section of the Add/Modify/Delete QoS Map window. For example,
in Figure 16-52 the name of the map is "ppp1QosWizard."