HP 7102dl - ProCurve Secure Router Configuration Manual page 945

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-22. Logging Settings Tab
2. Check the Event History box to enable the event history for the ProCurve
Secure Router.
3. In the Event History Priority Level field, use the pull-down menu to set
the event history priority level:
• info (4)—for example, policy matches
• notice (3)—for example, session logins
• warning (2)—for example, a Frame Relay subinterface becoming
active or inactive
• error (1)—for example, a blocked attack or PPP session opening:
– LCP going up
– LLDPCP going up
– IPCP going up
• fatal (0)—for example, WAN alarms (yellow, red, loss of frame, or loss
of signal); Frame Relay interface going down; or PPP session closing:
– LCP going down
– LLDPCP going down
– IPCP going down
4. Click Apply to save your changes.
Configuring the ProCurve Secure Router OS Firewall
16-31