HP 7102dl - ProCurve Secure Router Configuration Manual page 995

Using the Web Browser Interface for Advanced Configuration Tasks
Figure 16-64. Failure Parameters
15. Select the failure mode and settings.
• For the consecutive failures mode, specify the number of consecutive
test failures to allow before declaring failure.
• For the rate of failure mode, specify the number of failures allowed
within a set of tests. Specify the allowed number of failures in the
Number of failures (x) field and the size of the set of tests in the Total
number of tests (y) field.
16. Click the Next button. The Set Actions window displays.
Setting Up Network Monitoring
16-81