Comtrol RocketLinx ES7528 User Manual page 125

Fault Relay Output
Display
Event Selection
Event Selection
Ex: Cold Start event
Ex: Link Up event
Display
Syslog Configuration
Local Mode
Server Mode
Both
Disable
CLI Commands for Warnings
Switch# show relay 1
Relay Output Type : Port Link
Port : 1, 2, 3, 4, 5,
Switch(config)# warning-event
coldstart
warmstart
linkdown
linkup
authentication
fault-relay
poe-powering
power
sfp-ddm
super-ring
time-sync
Switch(config)# warning-event coldstart
Set cold start event enable ok.
Switch(config)# warning-event linkup
[IFNAME] Interface list, ex: fa1,fa3-5,gi25-28
Switch(config)# warning-event linkup fa5
Set fa5 link up event enable ok.
Switch# show warning-event
Warning Event:
Cold Start: Enabled
Warm Start: Disabled
Authentication Failure: Disabled
Link Down: fa4-5
Link Up: fa4-5
Power Failure:
Super Ring Topology Change: Disabled
Fault Relay: Disabled
Time synchronize Failure: Disabled
PoE Powering:
SFP DDM: Enabled
Switch(config)# log syslog local
Switch(config)# log syslog remote
192.168.250.33
Switch(config)# log syslog local
Switch(config)# log syslog remote 192.168.250.33
Switch(config)# no log syslog local
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 125
Switch cold start event
Switch warm start event
Switch link down event
Switch link up event
Authentication failure event
Switch fault relay event
Switch PoE powering or unpowered event
Switch power failure event
Switch SFP DDM abnormal event
Switch super ring topology change event
Switch time synchronize event
CLI Commands for Warnings