Redundant Ring - Comtrol RocketLinx ES7528 User Manual

Redundant Ring

RSTP Information
Port Priority Decide which port should be blocked by priority in your LAN. Range is 0 through 240 in increments
of 16.
Oper P2P Some of the rapid state transactions that are possible within RSTP are dependent upon whether the
Port in question can be concerned to exactly one other Bridge (ie., it is served by a point-to-point
LAN segment), or can be connected to two or more Bridges (i.e., it is served by a shared medium
LAN segment).
Oper Edge Present in implementations that support the identification of edge ports. All ports directly connected
to end stations cannot create bridging loops in the network and can thus directly transition to for-
warding, skipping the listening and learning stages. When the non-bridge device connects an admin
edge port, this port is in blocking state and turn to forwarding state in 4 seconds.
Reload Click to reload.
Redundant Ring
The most common industrial network redundancy is to form a ring or loop. Typically, the managed switches are connected in
series and the last switch is connected back to the first one. In such connection, you can implement Redundant Ring
technology.
Redundant Ring
New Ring To create a Redundant Ring enter the Ring ID, which has range from 0 to 31. If the name field is left
blank, the name of this ring is automatically named with the Ring ID
Ring Configuration
ID Once a Ring is created, this appears and can not be changed.
Name This field shows the name of the Ring. If it is not entered when creating, it is automatically named by
the rule RingID.
Version The version of Ring can be changed here, the choices are Rapid Super Ring or Super Ring.
72 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
Description
Description
Redundant Ring