Command Line For Poe Control - Comtrol RocketLinx ES7528 User Manual

Command Line for PoE Control

Command Line for PoE Control
This table provides detailed information about the CLI commands for PoE control.
Syntax
show poe system
Parameters --
Command Mode Enable mode
Description Display the status of the PoE system.
Examples
Switch> enable
Switch# show poe system
PoE System
62 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
PoE Admin : Enable
PoE Hardware : Normal
PoE Input Voltage :
Vmain 1 : 52.8 V
Vmain 2 : 53.0 V
Vmain 3 : 52.5 V
Ouput power : 0.0 Watts
Temperature 1 : 39 degree
Temperature 2 : 41 degree
Temperature 3 : 47 degree
Power information :
Budget :
DC Power 1 : 400 Watts (In Use)
DC Power 2 : 400 Watts
AC Power : 300 Watts (In Use)
Total : 1100 Watts
700 Watts in Use
Warning water level : N/A
Utilization : 0 %
Event : Normal
Command Line for PoE Control