Save to Flash
Save Configuration allows you to save any configuration you just made to the flash. Powering off the switch without clicking
Save Configuration causes loss of the new settings. After selecting Save Configuration, click Save to Flash to save your
new configuration.
Command Lines for Saving to Flash
Feature
Save
Logout
The RocketLinx ES7528 provides two logout methods. The CLI connection logs out of configure terminal mode, if you do not
input any command after 30 seconds. The Logout command in the web interface allows you to manually logout the web
connection. Click Yes to logout, No to go back the configuration page.
Command Lines for Logging Out
Feature
Logout
Save to Flash
SWITCH# write
Building Configuration...
[OK]
Switch# copy running-config startup-config
Building Configuration...
[OK]
SWITCH> exit
SWITCH# exit
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 137
Command Line
Command Line
Save to Flash