Table of Contents
Advertisement
6.
If you have not done so, you can change the RocketLinx ES7528 IP address to meet your network environment.
a.
Double-click Basic Setting.
b.
Click IP Configuration.
To use static addressing, enter a valid IP add dress, subnet mask and default gateway.
To use DHCP, click Enable in the DHCP Client drop list.
c.
Click Apply.
To configure RocketLinx ES7528 features, go to
Secure Web Interface
The RocketLinx ES7528 web management page also provides secured management HTTPS login. All the configuration
commands are secure.
If you did not program the IP address for your network using NetVision
on Page 15), you need to change your computer IP address to 192.168.250.x (Network Mask: 255.255.0.0). The default IP
address for the RocketLinx ES7528 is 192.168.250.250.
1.
Open a command prompt window and ping the IP address for the RocketLinx ES7528 to verify a normal response time.
2.
Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.
3.
Type http://192.168.250.250 (or the IP address of the switch).and then press Enter.
4.
Click Continue to the web site (not recommended).
5.
Click No when the popup screen appears and requests you to trust the
secured HTTPS connection distributed by the RocketLinx ES7528.
6.
Click Run when requested to run the application (IP address).
Secure Web Interface
on Page 23.
Feature Configuration
(Programming Network Information Using NetVision
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 17
Preparation for Management
Advertisement
Table of Contents
