Firmware Upgrade - Comtrol RocketLinx ES7528 User Manual

Technical Tip:
Default Configuration File: The switch provides the default configuration file in the system. You
can use the Reset button on the Factory Default page or the Reload command in the CLI to reset
the system.
Running Configuration File: The CLI allows you to view the latest settings running in the
ES7528. The information shown here are the settings you have set up, but have not yet saved to the
flash. The settings must be saved to the flash in order to work after a power recycle. You can use
show running-config to view it in CLI.
Startup Configuration File: After you saved the running-config to flash, the new settings are
kept an d work after the power is cycled. Use the show startup-config to view it in the CLI. The
Backup command can only backup the configuration file to your PC or TFTP server.

Firmware Upgrade

Use this section to update the RocketLinx ES7528 with the latest firmware. Comtrol provides the latest firmware on the
Comtrol site. The new firmware may include new features, bug fixes, or other software changes. Comtrol Technical
ftp
Support suggests you use the latest firmware before installing the switch at a customer site.
Note: The system will be automatically rebooted after you finish upgrading firmware. You should alert the attached users
before updating the firmware that network interruption may occur.
Firmware Upgrade
System Firmware Version The firmware version on the RocketLinx ES7528.
System Firmware Date
Firmware Upgrade
The following represents a firmware upgrade using local file mode.
Firmware Upgrade
You should check the version number after the switch is rebooted.
The build date of the firmware on the switch.
Local File
• Upgrade the firmware using a local file.
• Browse to locate the Firmware File Name of the new firmware and click Upgrade.
TFTP Server:
• Upgrade the firmware by uploading the firmware using a TFTP server file.
• TFTP Server IP is the address of the TFTP server where the firmware files is located.
• Firmware File Name, type the file name of the firmware and then click Upgrade.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 39
Description
Firmware Upgrade