Comtrol RocketLinx ES7528 User Manual page 63

Syntax
show poe interface IFNAME
Parameters IFNAME : interface name
Command Mode Enable mode
Description Display the PoE status of interface.
Examples
Switch> enable
Switch# show poe interface fa1
Interface fastethernet1 (POE Port 1)
Syntax
show poe pd_detect
Parameters --
Command Mode Enable mode
Description Display the status of pd status detection.
Examples
Switch# show poe pd-detect
PD Status Detection
Command Line for PoE Control
Control Mode : User (Disable)
Powering Mode : 802.3af
Operation Status : Off
Detection Status : Valid
Classification : N/A
Priority : Highest
Output Power : 0.0 Watts, Voltage : 0.0 V, Current : 0 mA
Power Budget :
Budget : 32.0 Watts, effective 0 Watts
Warning water level : N/A
Utilization : 0 %
Event : Normal
Status : Enabled
Host 1 :
Target IP : 192.168.250.100
Cycle Time : 10
Host 2 :
Target IP : 192.168.250.200
Cycle Time : 20
Host 3 :
Target IP : 192.168.250.15
Cycle Time : 30
Host 4 :
Target IP : 192.168.250.20
Cycle Time : 40
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 63
Command Line for PoE Control