Preparation for Management
3.
Log in to the switch. The default user name is admin, password, admin.
Switch login: admin
Password:
RocketLinx ES7528 (version 1.0-20100930-15:49:56).
Switch>
4.
If necessary, configure the IP address for your network. The following example shows how to program an IP address of
192.168.11.252 with a Class B subnet mask (255.255.0.0).
Switch> enable
Switch# configure terminal
Switch(config)# int vlan1
Switch(config-if)# ip address 192.168.11.252/16
Refer to Page 44 for information about additional commands that are available for IP configuration.
To configure RocketLinx ES7528 features with the CLI, go to
20 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
on Page 23.
Feature Configuration
Using the Serial Console