Comtrol RocketLinx ES7528 User Manual page 110

IP Filter
Highlight an IP Filter ID/Name and click Edit to configure the IP Filter Rules.
Filter Type: IP
Standard/Extended
Filter ID/Name
Action
Source/Destination
Address
Source/Destination
Wildcard
Protocol
Destination Port
ICMP Type
ICMP Code
Egress Port
Add
Remove
Modify
110 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
The ID or the name for this IP Filter entry.
Select Permit to permit traffic from specified sources and Deny to deny traffic from those sources.
Type the source/destination IP address you want configured.
You can define a single host or a group of hosts based on
the wildcard. Some of the allowance examples are shown in
the following table.
Select a protocol that you want associate with the filter. The field includes IP, TCP, UDP or ICMP
type.
TCP/UDP port of the Destination Port field.
The ICMP Protocol Type range from 1 ~ 255.
The ICMP Protocol Code range from 1 ~ 255.
Bind this Filter to selected egress port.
Adds the rule to the Filter.
Removes the selected rule from the Filter.
Allows you to edit the rule which you selected.
Description
IP Filter