802.1X Port Status - Comtrol RocketLinx ES7528 User Manual

802.1x Port Status

802.1x Port Configuration
Max Request
Guest VLAN
Host Mode
Admin Control Direction
Apply
Initialize Selected
Reauthenticate Selected
Default Selected
802.1x Timeout Configuration
Re-Auth Period
Quiet Period
Tx Period
Supplicant Timeout
Sever Timeout
Apply
802.1x Port Status
Use the 802.1x Port Status page to observe the port status for Port Control Status, Authorize Status, Authorized Supplicant, and
Oper Control Direction for each port.
114 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
This is the maximum times that the RocketLinx ES7528 allows a client request.
The permitted range for this field is 0 to 4094. If this field is set to 0, that means the
port is blocked after an authentication failure. Otherwise, the port is set to Guest
VLAN.
If there is more than one device connected to this port, set the Host Mode to Single,
which means only the first PC to authenticat e successfully can access this port. If this
port is set to Multi, all of the devices can access this port once any one of them
passes the authentication.
Use this to determine which devices can only send data or both send and receive data.
Click Apply to apply the settings.
Click to set the authorization state of the selected port to initialize status.
Click to send an EAP Request to the requestor to request reauthentication.
Click to reset the configurable 802.1x parameters of selected port to the default val-
ues.
Controls the Re-authentication time interval (seconds), you can enter a range of 1 -
65535.
When authentication fails, the RocketLinx ES7528 waits for a period and then tries to
communicate with the RADIUS server again.
The time interval of the authentication request.
The timeout for the client authentication.
The timeout for the server response for authentication.
Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these settings
if the RocketLinx ES7528 is powered off.
Description
802.1x Port Status