Cli Commands For Multicast Filtering - Comtrol RocketLinx ES7528 User Manual

CLI Commands for Multicast Filtering

The following table provides detailed information about command lines for multicast filtering configuration.
Feature
IGMP Snooping
IGMP Snooping -
Global
IGMP Snooping -
VLAN
Disable IGMP
Snooping - Global
Disable IGMP
Snooping - VLAN
Display – IGMP
Snooping Setting
Display – IGMP Table
CLI Commands for Multicast Filtering
Switch(config)# ip igmp snooping
IGMP snooping is enabled globally. Specify on which vlans
IGMP snooping enables
Switch(config)# ip igmp snooping vlan
VLANLIST allowed vlan list
all all existed vlan
Switch(config)# ip igmp snooping vlan 1-2
IGMP snooping is enabled on VLAN 1-2.
Switch(config)# no ip igmp snooping
IGMP snooping is disabled globally ok.
Switch(config)# no ip igmp snooping vlan 3
IGMP snooping is disabled on VLAN 3.
Switch# sh ip igmp
interface vlan1
enabled: Yes
version: IGMPv1
query-interval; 125s
query-max-response-time: 10s
Switch# sh ip igmp snooping
IGMP snooping is globally enabled
Vlan1 is IGMP snooping enabled
Vlan2 is IGMP snooping enabled
Vlan3 is IGMP snooping disabled
Switch# sh ip igmp snooping multicast all
VLAN IP Address
---- ---------------
1 239.192.8.0
1 239.255.255.250
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 99
CLI Commands for Multicast Filtering
Command Line
Type Ports
------- ------------------------
IGMP fa6,
IGMP fa6,