CLI Commands of the Traffic Prioritization
CLI Commands of the Traffic Prioritization
This table provides detailed information about command lines for traffic prioritization configuration
Feature
QoS Setting
Queue Scheduling –
Round Robin
Queue Scheduling –
Strict Priority
Queue Scheduling -
WRR
Port Setting – Priority
Display – Queue
Scheduling
Display – Port Setting
92 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
Switch(config)# qos queue-sched
rr
Round Robin
sp
Strict Priority
wrr
Weighted Round Robin
Switch(config)# qos queue-sched rr
The queue scheduling scheme is setting to Round Robin.
Switch(config)# qos queue-sched sp
The queue scheduling scheme is setting to Strict Priority.
Switch(config)# qos queue-sched wrr 1 1 1 1 1 1 1 1
The queue scheduling scheme is setting to Weighted Round Robin.
Switch(config)# interface fa1
Switch(config-if)# qos priority
DEFAULT-PRIORITY
Switch(config-if)# qos priority 7
The default port priority value is set 7 ok.
Note: When change the port setting, you should Select the specific port first. Ex: fa1 means Fast
Ethernet Port 1.
Switch# show qos queue-sched
QoS queue scheduling scheme: Weighted Round Robin (Use an 8,4,2,1 weight)
Switch# show qos port-priority
Port Default Priority :
Port
Priority
-----+----
1
0
2
0
3
0
4
0
5
0
6
0
7
0
8
0
9
0
10
0
...
26
0
27
0
28
0
Command Line
Assign an priority (7 highest)
CLI Commands of the Traffic Prioritization