Syslog Configuration - Comtrol RocketLinx ES7528 User Manual

SysLog Configuration

SysLog Configuration
System Log is useful to provide the system administrator locally or remotely RocketLinx ES7528 events history. There are two
System Log modes provided by the RocketLinx ES7528, local mode and remote mode.
SysLog Configuration
Local Mode
Remote Mode
Both
Apply
When enabling Local or Both modes, you can monitor the system logs in the Monitor and Diag /Event Log page.
122 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
The RocketLinx ES7528 prints the events that have been selected in the
Event Selection page to the System Log table of the RocketLinx ES7528.
You can monitor the system logs in the Monitor and Diag /Event Log page.
You should assign the IP address of the System Log server. The RocketLinx
ES7528 sends the events that occurred in the selected in Event Selection page
to System Log server you assigned.
Above two modes can be enabled at the same time.
Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these
settings if the RocketLinx ES7528 is powered off.
Description
SysLog Configuration