Storm Control - Comtrol RocketLinx ES7528 User Manual

Rate Control
Apply

Storm Control

The Storm Control is similar to Rate Control. Rate Control filters all the traffic over the threshold you input by the user
interface. Storm Control allows you to define the rate for specific Packet Types.
Storm Control
Broadcast
DLF
Multicast
Rate (packet/sec)
Apply
Storm Control
Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain
these settings if the RocketLinx ES7528 is powered off.
To enable or disable broadcast storm control on this port.
Choose Enable/Disable to enable or disable the storm control of
specific port.
To enable or disable destination lookup failure storm control on
this port.
To enable or disable multicast storm control on this port.
These columns allow you to manually assign the limit rate of the
port. The unit is packets per second. The limit range is from 1 to
262143 packet/sec, zero means no limit. The maximum available
value of Fast Ethernet interface is 148810, this is the maximum
packet number of the 100M throughput.
Click Apply to apply the settings. It may take some time and the
web interface may become slow, this is normal condition.
Note: You must Save the settings (Page 137), if you want to
maintain these settings if the RocketLinx ES7528 is
powered off.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 51
Description
Description
Storm Control