User Exec Mode; Privileged Exec Mode - Comtrol RocketLinx ES7528 User Manual

Feature Configuration

User EXEC Mode

When you login to the
RocketLinx ES7528 with the
CLI, you are in User EXEC
mode. You can ping, telnet
remote device, and show some
basic information.
Type enable to enter next mode,
exit to logout. ? to see the
command list.

Privileged EXEC Mode

Type enable in User EXEC mode, to enter the Privileged EXEC mode. In this mode, the system allows you to view current
configuration, reset default, reload switch, show system information, save configuration, and enter the global configuration
mode.
Type configure terminal to enter next mode, exit to leave. ? to see the command list.
Switch>enable
Switch#
archive
clear
clock
configure
copy
debug
disable
dot1x
end
exit
list
mac
no
pager
ping
quit
reboot
reload
show
telnet
terminal
traceroute
write
24 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
Switch>
enable
exit
list
ping
quit
show
telnet
traceroute
manage archive files
Reset functions
Configure time-of-day clock
Configuration from vty interface
Copy from one file to another
Debugging functions (see also 'undebug')
Turn off privileged mode command
IEEE 802.1x standard access security control
End current mode and change to enable mode
Exit current mode and down to previous mode
Print command list
MAC interface commands
Negate a command or set its defaults
Terminal pager
Send echo messages
Exit current mode and down to previous mode
Reboot system
copy a default-config file to replace the current one
Show running system information
Open a telnet connection
Set terminal line parameters
Trace route to destination
Write running configuration to memory, network, or terminal
Turn on privileged mode command
Exit current mode and down to previous mode
Print command list
Send echo messages
Exit current mode and down to previous mode
Show running system information
Open a telnet connection
Trace route to destination
User EXEC Mode