Comtrol RocketLinx ES7528 User Manual page 68

Command Line for PoE Control
Syntax
poe pd_detect enable/disable
Parameters enable: enable PD Status Detection function
disable: disable PD Status Detection function
Command Mode Configuration mode
Description Enable/Disable the PD Status Detection function
Examples To enable the function of pd status detect function
Switch(config)# poe pd_detect enable
To disable the function of pd status detect function
Switch(config)# poe pd_detect disable
Syntax
poe pd_detect ip_address cycle_time
Parameters IP address : A.B.C.D
Cycle time : Valid range 10-3600 second and must be multiple of 10
Command Mode Configuration mode
Description Apply a rule of PD Status Detection.
Examples Apply a rule which ping 192.160.1.2 per 20 seconds. If 192.160.1.2 is timed out, the PD status
detection is re-enable the PoE.
Switch(config)# poe pd_detect 192.160.1.2 20
68 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
Command Line for PoE Control