Snmp Traps - Comtrol RocketLinx ES7528 User Manual

SNMP Traps

SNMP Traps
SNMP Trap is the notification feature defined by SNMP protocol. All the
SNMP management applications can understand such trap information. So
you do not need to install new applications to read the notification
information.
Use this page to Enable SNMP Trap, configure the SNMP Trap server
IP, Community name, and trap Version V1 or V2. After configuration,
press Apply to enable the settings You can see the change of the SNMP
pre-defined standard traps and Comtrol pre-defined traps. The pre-defined
traps can be found in the
Comtrol private MIB.
Note: You must Save the settings (Page 137), if you want to maintain
these settings if the RocketLinx ES7528 is powered off.
RocketLinx ES7528Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 103
SNMP Traps