Table of Contents
Advertisement
VLAN Configuration
VLAN Configuration
Static VLAN
Configuration
The following figure shows a static VLAN configuration table. The new VLAN 3 was created and the VLAN name is test.
Egress rules of the ports are not configured.
This figure displays how to configure the Egress rule of the ports.
Use the following steps to configure Egress rules: Select the VLAN ID. Entry of the selected VLAN turns to light blue. Assign
Egress rule of the ports to U or T. Press Apply to apply the setting. If you want to remove one VLAN, select the VLAN entry
and then click the Remove button.
82 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
•
VLAN ID: The VLAN identifier for this VLAN.
•
Name: The name of the VLAN.
•
1 - 28: The corresponding port number on the VLAN.
•
-- Not available
•
U Untag, indicates that egress/outgoing frames are not VLAN tagged.
•
T Tag, indicates that egress/outgoing frames are to be VLAN tagged.
•
Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these settings if the
RocketLinx ES7528 is powered off.
•
Click Remove to remove the selected static VLAN.
•
Click Reload to reload static VLAN configuration.
Description
VLAN Configuration
Advertisement
Table of Contents
