Aggregation Status - Comtrol RocketLinx ES7528 User Manual

Aggregation Status

This page shows the status of port aggregation. Once the aggregation ports are negotiated, you will see the following status.
Aggregation Status
Group ID
Type
Aggregated Ports
Individual Ports
Link Down Ports
Load Balance
Apply
Aggregation Status
Displays Trunk 1 to Trunk 8 set up.
Static or LACP set up.
When LACP links, you can see the member ports in the Aggregated column.
When LACP is enabled, member ports of LACP group that are not connected to
the correct LACP member ports are displayed in the Individual column.
When LACP is enabled, member ports of LACP group that are not linked up are
displayed in the Link Down column.
There are several load balance types based on dst-ip (Destination IP), dst-mac
(Destination MAC), src-dst-ip (Source and Destination IP), src-dst-mac (Source
and Destination MAC), src-ip (Source IP), src-mac (Source MAC).
Click Apply to apply the settings.
Note: You must Save the settings (Page 137), if you want to maintain these
settings if the RocketLinx ES7528 is powered off.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 53
Description
Aggregation Status