Table of Contents
Advertisement
Preparation for Management
3.
In the Session configuration, enter the Host Name (IP Address of the RocketLinx ES7528), Port number (default = 22),
click SSH for the protocol, and then click Open to start the SSH session console.
4.
After click Open, you will see the cipher information in the popup screen. Click Yes to accept the Security Alert.
After few seconds, the SSH connection to the RocketLinx ES7528 opens.
5.
Enter the Login Name and Password. The default login name and password are admin.
All the commands you see in SSH are the same as the CLI commands you see through the RS-232 console.
To configure RocketLinx ES7528 features, go to
22 - RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A
on Page 23.
Feature Configuration
SSH Client
Advertisement
Table of Contents
