Radius Commands - Lantronix SecureLinx SLC8 User Manual

4. Select or clear the checkboxes for the following rights.
Full
Administrative
Networking
Services
SecureLinx
Network
Date/Time
Local Users
Remote
Authentication
SSH Keys
User Menus
Reboot &
Shutdown
Firmware &
Configuration
Diagnostics &
Reports
SLC Network
Web Access
Device Port
Configuration
Device Port
Operations
PC Card or USB
5. Click the Apply button.
Note: You must reboot the SLC before your changes take effect.

RADIUS Commands

The following CLI commands correspond to the RADIUS page. For more information, see
Command Reference.
set radius (on page 239)

set radius server (on page 240)

show radius (on page 240)

SecureLinx SLC User Guide
Right to add, update, and delete all editable fields.
Right to enter Network settings.
Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Right to view and manage SecureLinx units (e.g., SLPs, Spiders, SLCs) on the
local subnet.
Right to set the date and time.
Right to add or delete local users on the system.
Right to assign a remote user to a user group and assign a set of rights to the user.
Right to set SSH keys for authenticating users.
Right to create a custom user menu for the CLI for NIS users.
Right to use the CLI or shut down the SLC and then reboot it.
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects Reboot & Shutdown.
Right to obtain diagnostic information and reports about the unit.
Right to view and manage SLCs on the local subnet.
Right to access Web-Manager.
Right to enter device port settings.
Right to control device ports.
Right to enter modem settings for PC Cards or the USB port.
12: User Authentication
15:
154