Viewing The Lldp Configuration - Dell S6100 Configuration Manual

advertise {dcbx-appln-tlv | dcbx-tlv | dot3-tlv | interface-port-desc | management-tlv |
med }
Include the keyword for each TLV you want to advertise.
• For management TLVs: system-capabilities, system-description.
• For 802.1 TLVs: port-protocol-vlan-id, port-vlan-id .
• For 802.3 TLVs: max-frame-size.
• For TIA-1057 TLVs:
•
guest-voice
•
guest-voice-signaling
•
location-identification
•
softphone-voice
•
streaming-video
•
video-conferencing
•
video-signaling
•
voice
•
voice-signaling
In the following example, LLDP is enabled globally. R1 and R2 are transmitting periodic LLDPDUs that contain management, 802.1, and
802.3 TLVs.
Figure 81. Configuring LLDP

Viewing the LLDP Configuration

To view the LLDP configuration, use the following command.
• Display the LLDP configuration.
CONFIGURATION or INTERFACE mode
show config
Examples of Viewing LLDP Configurations
The following example shows viewing an LLDP global configuration.
Dell(conf)#protocol lldp
Dell(conf-lldp)#show config
!
protocol lldp
Link Layer Discovery Protocol (LLDP) 521